| |
Apollo Solar Maximum Powerpoint
Controllers
MPPT charge controllers
allow your solar panels to operate
at their optimum power output voltage, improving their
performance by as much as 30%. They can also match the
output of the solar panels to the battery voltage to
insure maximum charge (amps). MPPT charge controllers
are more expensive that PWM charge controllers,
but the advantages are worth the cost. If you can afford
it, you should definitely use an MPPT charge controller.
Apollo T80 - The TurboCharger™
T80 integrates Maximum Power Point Tracking,
battery charge management, state of
charge information and communications into a single
device. With 80 amps continuous output, the T80 will
process up to 5300 Watts of PV power - the largest capacity
in the industry by over 30%. The TurboCharger™
T80 produces full rated power without temperature derating
up to 40oC. This means that full power output can be
maintained even in extreme temperature conditions, when
it is most needed. The efficient MPPT technology dramatically
reduces the cost of a PV system by reducing the number
of PV panels required, eliminating the need for heavy
gauge wiring, and increasing the life of the storage
batteries.
Apollo Solar Maximum
Powerpoint Controllers
The T80 captures up to 35% more power from the
photovoltaic (PV) array. It offers two user selectable
MPPT modes. The controller uses the same technology
that Apollo developed to help NASA harness additional
power from their solar arrays.
* Charges 12, 24 or 48
Volt batteries.
* 150 V max PV input voltage.
* Internal 4 line 20 character LCD with backlight.
* Includes TriMetric Battery Energy Meter functions.
* Comes with smart shunt and associated cables.
* Shunt Included.
* Made in the USA.
* 5 year warranty. Repaired in Australia by Solar
Inverters Pty Ltd. |
Apollo Solar T80 80A MPPT Charge Controller,
with temp sense
Price: 1,395.00
FEATURES:
Output Current: 80 amps Continuous @
40° C
Battery Voltages: 12, 24, 48 V DC
Max PV Input: 70 amps
Max PV Array: 5300 Watts
Max PV Open Circuit Voltage(VOC): T80 = 150 Vdc
T80HV = 200 Vdc
Charge Regulation: Programmable set points for
Bulk, Absorption, Float with Auto or Manual Equalize.
MPPT Mode: Apollo patented algorithm recalculates
the maximum power point each 2mS.
Battery Temperature Compensation: 5.0 mV °C
per 2 volt cell (Temp. Comp. Sensor Included at
no extra cost).
DC to DC Conversion Capability: Charge 48v batteries
with a 72, 84, or 96 Volt nominal array
Charge 24v batteries with a 36, 48, 60, 72, 84,
or 96 Volt nominal array
Charge 12v batteries with a 24, 36, 48, 60 or
72 Volt nominal array
Power Conversion Efficiency: 97% to 99% depending
on array to battery voltage ratio
(Highest efficiency at 60V array into 48V battery).
Unit Dimension: (L x W x D ) 387 mm x 216 mm x
111mm
Unit Weight: 7.3 kg
Shipping Weight: 10.4 kg
Shipping Dimensions: 457 mm x 304 mm x330 mm
5 Years Warranty
DOWNLOAD
PRODUCT SPECIFICATIONS
|
Prices include freight
to nearest regional centre in Qld.
Freight cost to outlying areas is extra.
All prices are in Australian Dollars inclusive 10% GST.
All prices are subject to change and should be confirmed
before ordering.
|
and
