Victron Skylla Battery Chargers

The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.
Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting. In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.

VICTRON Skylla TG 48V 25A 1+1C battery charger

Price: $1,805.00

FEATURES:
Input Voltage: 230 VDC
Input frequency: 45-65 Hz
Power factor: 1
Charge voltage 'absorption': 57 VDC
Charge voltage 'float': 53 VDC
Recommended battery capacity: 125-250 Ah
Temperature sensor: Yes
Forced cooling: Yes, temperature and current controlled fan
Operating temperature range:-20 to 60°C
Humidy Maximum: 95%
Ignition protected: Yes
Battery-connection: M8 Studs
AC-connection: screw-clamp 2,5 mm² (AWG 6)
Protection category: IP21
Weight: 10kg
Dimensions: 365x250x257mm

2 Year Warranty

DOWNLOAD PRODUCT SPECIFICATIONS

VICTRON Skylla TG 48V 50A 1+1C battery charger

Price: $3,125.00

FEATURES:
Input Voltage: 230 VDC
Input frequency: 45-65 Hz
Power factor: 1
Charge voltage 'absorption': 57 VDC
Charge voltage 'float': 53 VDC
Recommended battery capacity: 250-500 Ah
Temperature sensor: Yes
Forced cooling: Yes, temperature and current controlled fan
Operating temperature range:-20 to 60°C
Humidy Maximum: 95%
Ignition protected: Yes
Battery-connection: M8 Studs
AC-connection: screw-clamp 2,5 mm² (AWG 6)
Protection category: IP21
Weight: 10kg
Dimensions: 365x250x257mm

2 Year Warranty

DOWNLOAD PRODUCT SPECIFICATIONS