24 Volt Battery Chargers 
                      
24V 
                        Battery Chargers - Different types of batteries 
                        require different charging regimes. SLA, 
                        AGM and Gel batteries 
                        are traditionally charged at a lower voltage than Flooded 
                        Lead acid batteries. 
                        It is recommend to charge batteries at about 10% of their 
                        amp hour capacity. For example, an 80Ah deep cycle battery 
                        should be changed at a rate of about 8A.
                        SLA, AGM and Gel batteries are traditionally charged at 
                        a lower voltage than Flooded Lead acid batteries. Multi-stage 
                        chargers are recommended because they adjust 
                        current and voltage according to the battery's requirements. 
                      
                       Multistage charging ensures batteries receive 
                        optimum charging, but with minimal wear and tear, regulating 
                        the voltage and current delivered to the batteries in 
                        three automatic stages - 
                        
                        Bulk, Absorption, and Float:
                        
                        1. Bulk - Replaces 70-80% of the battery’s state 
                        of charge at the fastest possible rate. 
                        2. Absorption - Replenishes the remaining 20-30% of charge, 
                        bringing the battery to a full charge at a slow, safe 
                        rate.
                        3. Float - Voltage is reduced and held constant in order 
                        to prevent damage and keep batteries at a full charge.